4130B40 OUTLET PIPE FROM PUMP TO POWER STEERING CASE R R - Alfa - 166 - eLearn

3314642 - 4130B40 outlet pipe from pump to power steering case r r

) Position the vehicle on the ramp Proceed with the removal - 7040D12 engine front side cover (one) lh or rh - r r (Left side). Proceed with the removal - 7040D14 engine bay rear side cover (one) lh or rh - r r (Left side). 1. Undo the bolt (1a) and remove the bulkhead protection on the left side.2. remove the power steering fluid reservoir cap and drain the fluid using a suitable syringe.

1. Disconnect the connector on the delivery pipe from pump to power steering reservoir, pump side.

Proceed with the removal - 4450B10 Front WHEEL (one) - R.R. (Left side). Proceed with the removal - 7055B41 front supplementary wheel arch half (one), lh or rh, rear element r r (Left side). Proceed with removal - 7055B54 under-engine guard - r r . Proceed with removal - 1076B50 exhaust pipe attachment to engine - r + r . 1. Unscrew the connector (1a) and disconnect the outlet hose from the power steering box (1b), steering box side.2. Unscrew the bolt securing the delivery pipe from pump to power steering box.3. Unscrew the connector (3a) and disconnect the delivery pipe from pump to power steering box (3b), steering box side.

1. Remove the delivery pipe from pump to power steering box.

Refitting ( Removing

) Refit in its seating the delivery pipe from pump to power steering box.1. Connect the delivery pipe from pump to power steering box (1a), steering pump side, and tighten the connector (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Connector	PIPE BTWN PUMP + POWER STEERING BOX	M16	(Power steering box side) 3.4 ÷ 3.8

2. Tighten the bolt securing the bracket for the delivery pipe from pump to power steering box.3. Connect the outlet hose from the power steering box (3a) and tighten the connector (3b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
3b	Connector	POWER STEERING/EXCHANGE BOX RUBBER HOSE	M12	(Power steering box side) 3.2 ÷ 3.6

Proceed with refitting - 1076B50 exhaust pipe attachment to engine - r + r . Proceed with refitting - 7055B54 under-engine guard - r r . Proceed with the refitting - 7055B41 front supplementary wheel arch half (one), lh or rh, rear element r r (Left side). Proceed with the refitting - 4450B10 Front WHEEL (one) - R.R. (Left side). Connect the pipe from pump to power steering box, pump side, and tighten the connector to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Connector	PIPE BTWN PUMP + POWER STEERING BOX	M16	(Power steering pump side) 3.8 ÷ 4.2

Fit the bulkhead protection on the left side and secure it with its bolt. Proceed with the refitting - 7040D14 engine bay rear side cover (one) lh or rh - r r (Left side). Proceed with the refitting - 7040D12 engine front side cover (one) lh or rh - r r (Left side). Fill the power steering circuit with the recommended fluid.

	Type	Component	Name	Qty.
-	Fluid [l]	POWER ASSISTED STEERING CIRCUIT	TUTELA GI/A	1.4

Bleed the power steering system as described belowWith the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times. Check and, if necessary, top up the fluid level in the reservoir. Remove the car from the ramps.Start the engine and carry out 4 - 5 full steering wheel turn cycles (right and left). Top up the fluid level in the reservoir.