5010A16 HEATER/ENGINE LINE - R R - Alfa - 166 - eLearn

3314723 - 5010A16 heater/engine line - r r

) Position the vehicle on the ramp. Make sure that the ignition is OFF (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

1. Undo the drain plug in the radiator and drain the engine coolant.

Collect the coolant in a suitable container.

- 7040D12 engine front side cover (one) lh or rh - r r (left and right). - 7040D14 engine bay rear side cover (one) lh or rh - r r (left and right). - 5050B34 windscreen wiper arm/s complete with blade - r+r . - 7055A18 Windscreen base TRIM - R.R. . - 5050B38 windscreen wiper assembly - r+r or repair . 1. Disconnect the water return pipe from the heater, heater side.

1. Diconnect the branch of the water return pipe from the heater from the engine coolant reservoir.

1. Disconnect the water return pipe from the heater from the water pump rigid inlet pipe.

Refitting ( Removing

) Place the water return pipe from the heater back in its housing. Connect the water return pipe from the heater to the water pump rigid inlet pipe. Connect the branch of the water return pipe from the heater to the engine coolant reservoir.Connect the water return pipe from the heater, heater side. - 5050B38 windscreen wiper assembly - r+r or repair . - 7055A18 Windscreen base TRIM - R.R. . - 5050B34 windscreen wiper arm/s complete with blade - r+r . - 7040D14 engine bay rear side cover (one) lh or rh - r r (left and right). - 7040D12 engine front side cover (one) lh or rh - r r (left and right). Supply the engine cooling system with the recommended fluid.

	Type	Component	Name	Qty.
-	Fluid [l]	ENGINE COOLING CIRCUIT	Alfa Romeo Climafluid Super Permanent -40°C	9.1

Connect the battery terminal (-).Remove the car from the ramp.