7010N20 REAR SIDE DOOR LOCK MOTOR/CATCH ASSEMBLY - R R WITH DOOR PANEL AND SUPPORT FRAME REMOVED - Alfa - 166 - eLearn

3315102 - 7010N20 rear side door lock motor/catch assembly - r r with door panel and support frame removed

) - 7010A04 rear side door water guard protection - r r or arrange with door panel removed1. Disconnect the interior handle mechanism cable (1a) and the safety device mechanism link (1b) from the lever and control mechanism.2. Release the link and cable from the retaining clips on the door.3. Unscrew the bolts retaining the catch to the door.4. Disconnect electrical connection (4a) and remove catch (4b) complete with link and cable.

	Name	Connector
4a	CAE control unit	M55

	Name	Connector
-	Data not available yet	M56

Refitting ( Removing

) Check the condition of all catch components.Fit the catch inside the door and connect the catch electrical connection.Tighten the three bolts retaining the catch to the door.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR DOOR LOCK MECHANISM	M8	1.4

Secure the link and cable to the door using three retaining clips.Connect the cable to the inner handle. Connect the link to the safety device.Check the catch is working properly by opening and closing the door a few times. - 7010A04 rear side door water guard protection - r r or arrange with door panel removed