3315162 - 7035A04 WINDSCREEN - Removing penetration

Removing ( Refitting )  - 7055A18  Windscreen base TRIM - R.R. - 5050B34  windscreen wiper arm/s complete with blade - r+r - 7025A66  l/h or r/h bonnet lid support damper (one) - r+r - 7025A14  Bonnet LID - R.R. - 7030B34  sliding roof compartment decorative seal - r+r - 7040E40  modular front courtesy light - r r - 7040E28  courtesy light on sun blind - r r - 7040H32  sliding roof switch door panel - r r - 7040H30  front pillar trim - r r - 7055A10  MOULDING on roof panel (one), left or right - R.R. - 7065C30  interior l/h or r/h grab handle (one) - r+r - 7065C34  l/h or r/h sun blind (one) - r+r - 7065C59  interior rear view mirror with automatic antiglare device - r r - 7065C68  rear view mirror - r+r1. Unscrew the three bolts located under the courtesy light which secure the front part of the roof panel. 1. Check for leaks by applying soapy water around the outer edge.2. Blow compressed air out from the inside.Seal the area (using sealant for rubber gaskets). Refitting ( Removing ) Tighten the roof panel retaining bolts. - 7065C68  rear view mirror - r+r - 7065C59  interior rear view mirror with automatic antiglare device - r r - 7065C34  l/h or r/h sun blind (one) - r+r - 7065C30  interior l/h or r/h grab handle (one) - r+r - 7055A10  MOULDING on roof panel (one), left or right - R.R. - 7040H30  front pillar trim - r r - 7040H32  sliding roof switch door panel - r r - 7040E28  courtesy light on sun blind - r r - 7040E40  modular front courtesy light - r r - 7030B34  sliding roof compartment decorative seal - r+r - 7025A14  Bonnet LID - R.R. - 7025A66  l/h or r/h bonnet lid support damper (one) - r+r - 5050B34  windscreen wiper arm/s complete with blade - r+r - 7055A18  Windscreen base TRIM - R.R.