3314237 - 1036H14 valve tappets - check clearance

Dismantling ( Reassembling ) Place the vehicle on a ramp. - 4450B10  Front WHEEL (one) - R.R. (right).  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (right).  - 1016A20  single cam cover - r + r and replace gasket . Act on the drive pulley bolt using a suitable spanner so that the valves are in the closed position.1. With the engine cold, check, using a feeler gauge, that with the valves in a closed position the clearance is within the recommended values.

MeasurementValue
1Valve clearance (mm)Exhaust0.30 - 0.40
Inlet0.25 - 0.35
Reassembling ( Dismantling )  - 1016A20  single cam cover - r + r and replace gasket .  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (right).  - 4450B10  Front WHEEL (one) - R.R. (right). Remove the vehicle from the ramp.