1060G20 ENGINE RPM SENSOR - R.R. - Alfa - 166 - eLearn

3314370 - 1060G20 Engine RPM SENSOR - R.R.

) Position the vehicle on the lift. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

- 7055B54 under-engine guard - r r . 1. Disconnect the condensation oil return pipe from the separator from the sump.2. Disconnect the electrical connection for the engine rpm and timing sensor.

	Name	Connector
2	Rpm sensor	K46

3. Undo the bolt (3a) and remove the engine timing and rpm sensor (3b).

Refitting ( Removing

) Fit the engine rpm and timing sensor and fix it using the bolt to the cylinder block/crankcase.Connect the electrical connection for the engine rpm and timing sensor.Connect the condensation oil return pipe from the separator to the sump. - 7055B54 under-engine guard - r r . Connect the negative (-) battery terminal.Remove the vehicle from the ramp.