3314381 - 1060G80 ds electric injection control unit - r r

Removing ( Refitting ) Make sure that the ignition is OFF (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

NameConnector
-Battery  A1B 
1. Remove the buttons (1a) using the tool (1b) and remove the protection (1c).

NameCountry
1bScraper blade1.823.015.000
2. Open the two protective covers (2a) and undo the nuts (2b) underneath fixing the control unit cover.3. Undo the bolts (3a) and remove the control unit cover (3b).
1. Undo the bolts (1a), disconnect the electrical connections (1b), (1c), (1d), (1e) and (1f) and remove the diesel electronic injection system control unit (1g).

NameConnector
1bData not available yet-

NameConnector
1cData not available yet-

NameConnector
1dData not available yet-

NameConnector
1eData not available yet-

NameConnector
1fData not available yet-
Refitting ( Removing ) Connect the electrical connections to the diesel electronic injection control unit.Place the diesel electronic injection control unit back in its housing and fix it to the support using the bolts.Place the control unit cover back in its housing and fix it using the bolts.Tighten the nuts fixing the control unit cover and tighten the protective covers.Fit the protection and fix it using the buttons.Connect the battery terminal (-).