1064A50 SLEEVE JOINING TURBO CHARGER AND EXHAUST PIPE - R + R AND REPLACE SEAL - Alfa - 166 - eLearn

3314384 - 1064A50 sleeve joining turbo charger and exhaust pipe - r + r and replace seal

) Place the vehicle on a ramp. - 7055B54 under-engine guard - r r . 1. Undo the nuts (1a) and remove the reinforcement bracket (1b).2. Undo the bolts (2a) and disconnect the exhaust pipe attachment to the engine/manifold (2b).

1. Undo the nuts (1a) and remove the hose connecting the turbocharger and the exhaust pipe (1b).Remove the seal.

Refitting ( Removing

) Fit the hose connecting the turbocharger and the exhaust pipe, complete with a new gasket, and fix it tightening the nuts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	SLEEVE TO EXHAUST PIPE	M8	Turbocharger side 2.1 - 2.6

Connect the exhaust pipe attachment to the engine/manifold and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	EXHAUST PIPE TO ENGINE	-	Turbo hose/exhaust pipe side -

Fit the reinforcement bracket and fix it using the nuts. - 7055B54 under-engine guard - r r . Remove the vehicle from the ramp.