3314464 - 1820B17 pipe from inlet and outlet from master cylinder (pump) and hydraulic damper - r r with pedal unit removed for right hand drive versions
Removing ( Refitting ) 1. Undo the nuts (1a) and move the engine bay bulkhead cover (1b) for the gear selection and engagement cables. 2. Remove plastic pins (2a) and remove soundproof protection (2b).
1. Working from the engine bay side, undo the connector and disconnect
the rigid pipe from the master cylinder, vibration damper inlet
hose side.
1. Working from the passenger compartment, disconnect the reservoir
hose, reservoir/master cylinder rigid pipe side.
1. Undo the nuts retaining the duplex rigid pipe assembly bracket.2. Remove the duplex rigid pipe after releasing it from the bulkhead
passage.
Refitting
(
Removing
)
Place the duplex rigid pipes
back in their housings and secure them with the nuts.Connect the hose from the reservoir, master
cylinder / reservoir rigid pipe side.Connect the rigid pipefrom the master cylinder
on the vibrations damper inlet hose side and tighten the connector
to the specified torque.Place the soundproof cover back in its
housing and secure it using the plastic pins.Place the engine bay bulkhead cover for
the gear selection and engagement cables and secure using the nuts.