3314470 - 1820B46 RIGID supply PIPE from (pump) - master cylinder R.R .
Removing
(
Refitting
)
- 7040D12 engine front side cover
(one) lh or rh - r r
(left).
- 7040D14 engine bay rear side cover (one) lh or rh - r r
(left).
Drain the brake-clutch fluid from the
reservoir using a suitable syringe. - 1088B12 engine coolant reservoir mount - r r
.
- 7040A60 under facia trim - r+r
.
- 5580E12 immobiliser device ecu - r+r following electric circuit
check
.
- 5505C32 (one) securing wiring connectors beneath instrument
facia - r r
.
1. Cut the clip and remove the master cylinder guard.2. Undo the connector and disconnect the rigid delivery pipe from
the master cylinder on the master cylinder side.
 | Name | Connector |
|---|---|---|
| 3b | Data not available yet | - |
| Name | Connector |
|---|---|---|
| 3c | Data not available yet | - |
Refitting
(
Removing
)
Working from the interior compartment,
remove the rigid delivery pipe from the master cylinder.Connect the battery cable and starter motor
supply cable and secure with the nut.Secure the power steering pipes to the
retaining clip.Connect the rigid delivery pipe from the
master cylinder on the hose side and tighten its connector to the specified
torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Connector | RIGID DELIVERY PIPE FROM MASTER CYLINDER | M12 | Flexible pipe side 1.7 - 1.9 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Connector | RIGID DELIVERY PIPE FROM MASTER CYLINDER | M12 | Master cylinder side 1.7 - 1.9 |