3314481 - 2110C22 gear input shaft seals - r r
Removing ( Refitting ) - 7040D12 engine front side cover (one) lh or rh - r r (left and right). - 7040D30 engine bay front beam cover - r r . - 7040D14 engine bay rear side cover (one) lh or rh - r r (left and right). - 4450B12 front or rear wheels (two) - r+r . - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. (left). - 7055B39 front additional wheel arch half (one), lh or rh, front element - r r (right) - 7055A43 central front grille - r r . - 7055A41 RIGHT FRONT GRILLE - R.R. . - 7055B10 Front BUMPER - R.R. . - 7055B54 under-engine guard - r r . - 1076B50 exhaust pipe attachment to engine - r + r . - 2110A10 manual gearbox and differential - r + r . - 1810A24 clutch - r + r with gearbox removed . 1. At the bench, undo the bolts (1a) and remove the gearbox input shaft cover (1b), complete with gasket.
Refitting
(
Removing
)
Fit the gearbox input shaft cover, complete
with gasket, and fix it using the bolts.
The matching surfaces of the main shaft cover and the thrust bearing should be lubricated with Molycote PG 21 type grease. |