3340A26 LEFT FRONT WHEEL RPM SENSOR - R R - Alfa - 166 - eLearn

3314593 - 3340A26 left front wheel rpm sensor - r r

) Position the vehicle on the lift. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

- 7040D12 engine front side cover (one) lh or rh - r r (left). - 7040D14 engine bay rear side cover (one) lh or rh - r r (left). - 1088B12 engine coolant reservoir mount - r r . 1. Release the front left wheel speed sensor wiring from its clip.2. Disconnect the front left wheel speed sensor electrical connection.

	Name	Connector
2	Left. front wheel sensor for ABS	K70

3. Release from the bodywork the rubber cable pass for the front left wheel speed sensor wiring.

- 4450B10 Front WHEEL (one) - R.R. (left). - 7055B41 front supplementary wheel arch half (one), lh or rh, rear element r r (left). 1. Undo the bolt (1a) and remove the front left wheel speed sensor (1b) after releasing the wiring from the clamps (1c) and withdrawing it through the hole in the bodywork.

Refitting ( Removing

) Fit the front left sheel speed sensor and secure with its bolt.Thread the front left wheel speed sensor wiring through the hole in the bodywork and secure it. - 7055B41 front supplementary wheel arch half (one), lh or rh, rear element r r (left). - 4450B10 Front WHEEL (one) - R.R. (left). Secure the rubber cable pass for the front left wheel speed sensor wiring to the bodywork.Connect the electrical connection of the front left wheel speed sensor.Secure the front left wheel speed sensor wiring to its clip. - 1088B12 engine coolant reservoir mount - r r . - 7040D14 engine bay rear side cover (one) lh or rh - r r (left). - 7040D12 engine front side cover (one) lh or rh - r r (left). Connect the negative (-) battery terminal.Remove the vehicle from the ramp.