3340A28 RIGHT FRONT WHEEL RPM SENSOR - R R - Alfa - 166 - eLearn

3314594 - 3340A28 right front wheel rpm sensor - r r

) Position the vehicle on the lift. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

- 7040D12 engine front side cover (one) lh or rh - r r (right) - 7040D14 engine bay rear side cover (one) lh or rh - r r (right) 1. Release the front right wheel speed sensor wiring from its clamp.2. Disconnect the electrical connection for the front right wheel speed sensor.

	Name	Connector
2	Right. front wheel sensor for ABS	K71

3. Release the rubber cable pass for the front right wheel speed sensor wiring from the bodywork.

- 4450B10 Front WHEEL (one) - R.R. (right) - 7055B41 front supplementary wheel arch half (one), lh or rh, rear element r r (right) 1. Undo the bolt (1a) and remove the front right wheel speed sensor (1b), after releasing its wiring from the clamps (1c) and withdrawing it through the hole in the bodywork.

Refitting ( Removing

) Fit the front right wheel speed sensor and secure with its bolt.Thread the front right wheel speed sensor wiring through the hole in the bodywork and secure it. - 7055B41 front supplementary wheel arch half (one), lh or rh, rear element r r (right) - 4450B10 Front WHEEL (one) - R.R. (right) Secure the rubber cable pass for the front right wheel speed sensor wiring to the bodywork.Connect the electrical connection for the front right wheel speed sensor.Secure the front right wheel speed sensor wiring to its clamp. - 7040D14 engine bay rear side cover (one) lh or rh - r r (left). - 7040D12 engine front side cover (one) lh or rh - r r (left). Connect the negative (-) battery terminal.Remove the vehicle from the ramp.