3340A37 RIGHT REAR WHEEL RPM SENSOR - R R - Alfa - 166 - eLearn

3314596 - 3340A37 right rear wheel rpm sensor - r r

) Position the vehicle on the lift. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

- 7040B22 luggage compartment/load platform moulding - r+r . - 7040B20 back trim for luggage compartment/load platform - arrange . - 7025B41 boot lid lock . - 7040B10 load platform (luggage platform) trim - r+r . - 7040B13 load compartment/load platform right side trim - r r . 1. Undo the nut (1a) and bolt (1b), then move the anti-theft control unit (1c).2. Disconnect the electrical connection of the rear right wheel speed sensor.

	Name	Connector
2	Rear right wheel sensor for ABS	K76

3. Release the rubber cable pass for the rear right wheel speed sensor wiring from the bodywork.

1. Undo the bolt (1a) and remove the rear right wheel speed sensor (1b) after releasing the cable from the clamps (1c) and withdrawing it through the hole in the bodywork.

Refitting ( Removing

) Fit the rear right wheel speed sensor and secure with its bolt.Thread the rear right wheel speed sensor wiring through the hole in the bodywork and secure it.Secure the rubber cable pass for the rear right wheel speed sensor wiring to the bodywork.Connect the electrical wiring from the rear right wheel speed sensor.Refit the anti-theft control unit in its seating and tighten its nut and bolt. - 7040B13 load compartment/load platform right side trim - r r . - 7040B10 load platform (luggage platform) trim - r+r . - 7025B41 boot lid lock . - 7040B20 back trim for luggage compartment/load platform - arrange . - 7040B22 luggage compartment/load platform moulding - r+r . Connect the negative (-) battery terminal.Remove the vehicle from the ramp.