3314619 - 3380A30 handbrake cable - r+r
Removing ( Refitting ) Position the vehicle on the lift. - 7040L20 tunnel trim - r r . 1. Undo the bolts and remove the bracket.2. Undo the adjustment nut (2a) and remove the retaining clip (2b).3. Disconnect the handbrake cable.
- 4450B11 WHEEL (one) rear - R.R.
.
1. Disconnect the handbrake cable from the rear brake caliper.2. Undo the bolt (1a) and nut (1b) securing the handbrake cable
to the lower track control arm.
1. Unscrew the bolt (1a) and nut (1b) securing the handbrake cable
to the underbody.
1. Remove the handbrake cable after releasing the rubber cable pass
on the bodywork.
Refitting
(
Removing
)
Refit the handbrake cable in
its seating and secure the rubber cable pass on the bodywork.Tighten the nut and bolt securing the handbrake
cable to the underbody.Tighten the bolt securing the handbrake
cable to the lower track control arm.Connect the handbrake cable to the rear
brake caliper. - 4450B11 WHEEL (one) rear - R.R.
.
Connect the handbrake cable.Fit the retaining spring and tighten the
adjustment nut.Fit the bracket and secure it with the
bolts. - 3380A10 handbrake lever - r+r
.
- 7040L20 tunnel trim - r r
.
Remove the vehicle from the ramp.