3314677 - 4410C12 front suspension anti roll barjoint(end)(one), lh or rh - r r

Removing ( Refitting ) Position the vehicle on the lift. - 4450B10  Front WHEEL (one) - R.R. . 1. Undo the nut fixing the joint to the anti-roll bar.2. Release the electrical wiring for the front wheel rpm sensor from the mounting bracket.3. Undo the bolt (3a) and remove the mounting bracket (3b).4. Undo the nut (4a) and remove the front suspension anti-roll bar joint (4b). Refitting ( Removing ) Fit the front suspension anti-roll bar joint and fix it tightening the nut to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	FRONT ANTI-ROLL BAR JOINTS	M10	Shock absorber fork side 3.8 - 4.7

Fit the mounting bracket and fix it using the bolt.Fix the front wheel rpm sensor electrical wiring to the mounting bracket.Tighten the anti-roll bar joint fixing nut to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	FRONT ANTI-ROLL BAR JOINTS	M10	Front anti-roll bar side 3.8 - 4.7