3314686 - 4420B10 l/h or r/h rear suspension wishbone (one) - r+r

Removing ( Refitting ) Position the vehicle on the ramp. - 4450B11  WHEEL (one) rear - R.R. . 1. Undo the bolt (1a) fixing the handbrake cable mounting bracket (1b) to the lower track control arm. 1. Loosen the upper bolt fixing the strut to the hub.2. Undo the bolts fixing the lower track control arm bracket.3. Undo the lower bolt fixing the strut to the hub. 1. Loosen the bolts fixing the lower track control arm front mounting bracket to the bodyshell.2. Undo the bolt fixing the lower track control arm to the bracket. 1. Loosen the bolts fixing the track control arm mounting bracket to the rear suspension crossmember.2. Undo the bolt fixing the lower track control arm to the rear suspension crossmember.3. Remove the rear suspension lower track control arm. Refitting ( Removing ) 1. Replace the rear suspension lower track control arm in its housing.2. Tighten the bolt fixing the lower track control arm to the rear suspension crossmember to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	REAR WISHBONE	M12	(Rear suspension crossmember side) 7.1 ÷ 7.9

3. Tighten the bolts fixing the lower track control arm mounting bracket to the rear suspension crossmember to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
3	Bolt	LOWER TRACK CONTROL ARM MOUNTING BRACKET	M12	Rear suspension crossmember side 8.8 - 9.8

1. Tighten the bolt fixing the lower track control arm to the mounting bracket to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	REAR WISHBONE	M12	Bracket side 8.4 - 9.2

2. Tighten the bolts fixing the front track control arm mounting bracket to the bodyshell.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	SWINGING ARM JOINTS	-	Bodyshell side -

1. Tighten the lower bolt fixing the strut to the hub to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	REAR PILLAR-WISHBONE CUPPING LINKS	M14	Steering knuckle side 15.9 - 17.5

2. Tighten the bolts fixing the reinforcement bracket to the lower track control arm to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	LOWER TRACK CONTROL ARM REINFORCEMENT BRACKET	M8	Track control arm side 2.3 - 2.5

3. Tighten the upper bolt fixing the strut to the hub to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
3	Bolt	REAR PILLAR-WISHBONE CUPPING LINKS	M12	Steering knuckle side 11.7 - 12.9

Tighten the bolt fixing the handbrake cable mounting bracket to the lower track control arm. - 4450B11  WHEEL (one) rear - R.R. . Remove the car from the ramp. Check and if necessary adjust the wheel geometry values  - 4450A40  rear wheel geometry - check using optical equipment .