4450D14 HUB AXLE PILLAR OF ONE REAR WHEEL, L/H OR R/H - R+R WITH HUB REMOVED - INCLUDES BUSH REPLACEMENT IF NECESSARY - Alfa - 166 - eLearn

3314717 - 4450D14 hub axle pillar of one rear wheel, l/h or r/h - r+r with hub removed - includes bush replacement if necessary

) 1. Undo the bolts (1a) and remove the rear brake caliper bracket (1b).2. Undo the bolt (2a) and remove the rear brake disc (2b) protection.3. Loosen the bolt fixing the rear suspension adjustment rod to the crossmember.4. Undo the bolt fixing the rear suspension adjustment rod to the stub axle.5. Undo the nut fixing the joint to the rear anti-roll bar.

1. Undo the bolt fixing the rear shock absorber to the stub axle.2. Undo the upper bolt fixing the strut to the stub axle.3. Undo the lower bolt fixing the strut to the stub axle and extract it, as necessary and release the actual stub axle.4. Undo the bolts (4a) and remove the reinforcement bracket (4b) from the lower track control arm.

1. Release the stub axle for the rear wheel hub from the shock absorber and the upper track control arm then, remove it.2. Remove the spacer.

Refitting ( Removing

) Replace the stub axle for the rear wheel hub, complete with spacer, in its housing.1. Fit the reinforcement bracket (1a) on the lower track control arm and fix it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	LOWER TRACK CONTROL ARM REINFORCEMENT BRACKET	M8	Track control arm side 2.3 - 2.5

2. Tighten the lower bolt fixing the strut to the stub axle to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	REAR PILLAR-WISHBONE CUPPING LINKS	M14	Steering knuckle side 15.9 - 17.5

3. Tighten the upper bolt fixing the strut to the stub axle to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
3	Bolt	REAR PILLAR-WISHBONE CUPPING LINKS	M12	Steering knuckle side 11.7 - 12.9

4. Tighten the bolt fixing the rear shock absorber to the stub axle to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
4	Bolt	REAR DAMPER	M10	Hub steering knuckle side 6.6 - 7.4

1. Tighten the nut fixing the joint to the rear anti-roll bar to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Nut	REAR ANTI-ROLL BAR PIVOTS	M10	Anti-roll bar side 4.3 - 4.7

2. Tighten the bolt fixing the rear suspension adjustment rod to the stub axle to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	REAR SUSPENSION ANTISTEER LINK	M10	Steering knuckel side 6.6 - 7.4

3. Tighten the bolt fixing the rear suspension adjustment rod to the crossmember to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
3	Bolt	REAR SUSPENSION ANTISTEER LINK	M10	Rear suspension crossmember side 4.3 - 4.7

4. Fit the rear brake disc (4a) protection and fix it using the bolt (4b).5. Fit the rear brake caliper bracket (5a) and fix it tightening the bolts (5b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
5b	Bolt	REAR BRAKE CALIPER BRACKET	M10	Steering knuckle side 5.4 - 6.0