3314965 - 7005A10 front side door - adjust striker and adapt seal in necessary

Before altering the position of the door striker, ensure the door is properly aligned.1. Loosen the striker retaining screws.2. Use the locating holes to move striker (2a) into the correct position.Fit shims (2b) if necessary in order to adjust the striker accurately.3. Permitted adjustment movements are indicated by arrows.Following adjustment, tighten the lock striker screws to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	STRIKER ON FRONT SIDE DOOR PILLAR	M8	2.4