3315024 - 7005M20 front side door electric window system - r r with door panel/support frame removed
Removing
(
Refitting
)
- 7005A04 front side door water
guard protection - r r or replace with door panel removed 1. With the window fully raised, arrange a device to support the
window in raised position.2. Unscrew the nuts retaining the window bracket.3. Unscrew the nuts retaining the slide bracket.4. Unscrew the window motor retaining bolts.5. Adjust the electrically-operated window until the window is
closed, disconnect the window motor electrical connection.6. Remove the electrically-operated window from the door compartment. | Name | Connector |
|---|---|---|
| 5 | Front left electric window motor | N60 |
| Name | Connector |
|---|---|---|
| - | Front right electric window motor | N61 |
Refitting
(
Removing
)
Check the condition of the
electrically-operated window and ensure the motor is working properly.Fit the device into the door compartment.Tighten the four motor retaining bolts.Connect the window motor electrical connector.Position both slide guide nuts and tighten.Operate the electrically-operated window
button and extend the device until both window retaining nuts can be
screwed in without tightening.Remove the window support.
Adjust the device as indicated in operation:
7005M24 mechanism of front side door electric window system -
check position and fastening with door panel removed