3315046 - 7010A10 rear side door - adjust striker and adapt seal if necessary

Before altering the position of the door striker, ensure the door is properly aligned.If necessary, refer to operation:   7010A14  rear side door - adjust centering and moulding - includes adaptation of hinges and seals on door compartment1. Loosen the striker retaining screws.2. Move the striker to the correct position.Fit shims if necessary in order to adjust the striker accurately.Permitted adjustment movements are indicated by arrows. Tighten the retaining bolts.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR DOOR LOCK STRIKER	M8	2.4

Check the striker and catch fit together properly and are aligned when the door is closed.