3315142 - 7030B10 sliding roof (assembly) - r+r with roof panel removed

Removing ( Refitting ) With the ignition key in the stop position, disconnect the battery negative terminal.1. Disconnect the sun-roof motor electrical connection.

	Name	Connector
1	Data not available yet	N35

2. Disconnect the water drainage pipes.3. Unscrew the bolts retaining the chassis to the body.4. Unscrew the sun-roof perimeter retaining bolts5. Remove the sun-roof frame (5a) with the aid of a second operator and recover brackets (5b). Refitting ( Removing ) Check that the sun-roof components are undamaged.With the aid of a second operator, refit the sun-roof frame and brackets. Take care to refit only when the panel is closed.With the aid of a second operator, tighten the first 4 perimeter nuts and 4 bolts securing the frame and brackets.Tighten the remaining nuts and bolts.Connect the drainage pipes.Check the motor electrical connection.  - 7030B15  sliding roof panel (in sheet metal) - align