3315287 - 7055A50 frieze, hinge cover or code (one) - r+r
Removing ( Refitting ) 1. Before removing the wording, it is advisable to indicate the position in which it was fitted. To do this, use adhesive tape to create fitting reference marks.
1. Slightly heat the wording using a suitable blower.2. Remove the wording using a plastic spatula.
Refitting
(
Removing
)
Clean the panel surface using
heptane.1. Place adhesive tape over the new wording in order to ensure the
wording component centre lines are aligned.
1. Remove the protective backing film and apply the wording. Locate
with reference to the marks made previously.2. Remove the adhesive tape.