3315363 - 1028H58 connecting rod small end bush - replace
Dismantling
(
Reassembling
)
1. Remove the bush (1a) from the small end using a hydraulic press,
a suitable plate (1b) and the tool (1c) constructed as shown in
the diagram. | Name | Country |
|---|---|---|
| 1c | Tool for Extracting/Fitting | 1.860.821.001 |
Reassembling
(
Dismantling
)
1. Fit a new bush (1a) in the small end using a hydraulic press,
a suitable plate (1b) and the tool (1c) constructed as shown in
the diagram.The bush is fitted in the small end so that the lubrication port
in it is aligned with the one in the small end. | Name | Country |
|---|---|---|
| 1c | Tool for Extracting/Fitting | 1.860.821.001 |
 | Measurement | Value | |
|---|---|---|---|
| - | Inner diameter (mm) | 26.006 - 26.012 |
