1036B14 OVERHEAD CAMSHAFT - R R ON VEHICLE - WITH CYLINDER HEAD REMOVED - Alfa - 166 - eLearn

3315381 - 1036B14 overhead camshaft - r r on vehicle - with cylinder head removed

) 1. Position the tool in the vice.

	Name	Country
1	Mount	1.820.012.000

2. Fit the tool.

	Name	Country
2	Mount	1.820.258.000

3. Fit the tool.

	Name	Country
3	Spacer	1.820.267.000

4. Position the cylinder head (4a) on the supporting tools and fix it using the nuts (4b).

1. Undo the bolts (1a) and remove the vacuum unit (1b) complete with O-Ring (1c).

1. Undo the bolt (1a) for the driven pulley using the tools (1b).

	Name	Country
1b	Counter-torque	1.822.146.000

	Name	Country
1b	Counter-torque	1.822.156.000

2. Remove the driven pulley.

1. Undo the camshaft cap bolts.2. Remove the camshaft support lubrication pipe.3. Remove the camshaft caps.4. Remove the camshaft.5. Remove the camshaft front oil seal.

Refitting ( Removing

) Fit the camshaft.Fit the camshaft caps.Fit the camshaft support lubrication pipe.Tighten the camshaft cap bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAMSHAFT CAPS	M7	1.3 - 1.6

1. Fit a new camshaft front oil seal (1a) using the tool (1b).

	Name	Country
1b	Fitting tool	1.821.228.000

Fit the driven pulley.Tighten the driven pulley bolt to torque using the tool.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	TIMING DUCT PULLEY	M12	10.2 - 12.6

	Name	Country
-	Counter-torque	1.822.146.000

Fit the vacuum unit, complete with O-Ring, and fix it tightening the bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	BRAKE SERVO VACUUM PUMP	M6	2.1 - 2.6

Remove the cylinder head from the supporting tools.Remove the cylinder head support tools from the vice and return them.