3314237 - 1036H14 valve tappets - check clearance
Dismantling
(
Reassembling
)
Place the vehicle on a ramp. - 4450B10 Front WHEEL (one) - R.R.
(right).
- 7055B39 front additional wheel arch half (one), lh or rh,
front element - r r
(right).
- 1016A20 single cam cover - r + r and replace gasket
.
Act on the drive pulley bolt using a suitable
spanner so that the valves are in the closed position.1. With the engine cold, check, using a feeler gauge, that with
the valves in a closed position the clearance is within the recommended
values. | Measurement | Value | |
|---|---|---|---|
| 1 | Valve clearance (mm) | Exhaust | 0.30 - 0.40 |
| Inlet | 0.25 - 0.35 | ||
Reassembling
(
Dismantling
)
- 1016A20 single cam cover - r + r and replace gasket
.
- 7055B39 front additional wheel arch half (one), lh or rh,
front element - r r
(right).
- 4450B10 Front WHEEL (one) - R.R.
(right).
Remove the vehicle from the ramp.