3314823 - 5505A13 supplementary junction control unit in engine bay - r r

Removing ( Refitting ) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

NameConnector
-Battery  A1B 
 - 7040D12  engine front side cover (one) lh or rh - r r (left).  - 7040D14  engine bay rear side cover (one) lh or rh - r r (left).  - 1048A56  upper resonator device - r r . 1. Undo the nuts (1a) and withdraw the additional junction unit from its seating as far as necessary to disconnect the electrical connections (1b).
For precise identification of the electrical connections, see Wiring Diagrams Section.
1. Remove the additional junction unit.
Refitting ( Removing ) Refit the additional junction unit in its seating.Connect the electrical connections to the additional junction unit.Fix the additional junction unit with its nuts.  - 1048A56  upper resonator device - r r .  - 7040D12  engine front side cover (one) lh or rh - r r (left).  - 7040D14  engine bay rear side cover (one) lh or rh - r r (left). Connect the negative (-) battery terminal