3314006 - 0010T62 BRAKE and/or CLUTCH FLUID - Replace. fluid - Includes. washing pipes and bleeding air (Automatic transmission)

Position the vehicle on the ramp Refer to op.. 7040D12  engine front side cover (one) lh or rh - r r (left).  Refer to op.. 7040D14  engine bay rear side cover (one) lh or rh - r r (left). 1. Undo the bolt (1a) and move aside the coolant reservoir (1b). Drain the brake-clutch fluid from its reservoir using a suitable syringe.1. Remove the protective cap on the master cylinder bleed valve2. Connect the collection system (pipe and reservoir) to the bleed valve on the master cylinder. 3. Open the bleed valve on the master cylinder.Operate the clutch pedal until the system is completely empty. 1. Remove the protective cap on the brake caliper bleed valve. 2. Connect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. 3. Open the bleed valve on the brake caliper.Operate the brake pedal until all the fluid has come out. Repeat the above operations for the other brake calipers. 1. Connect the equipment to the brake-clutch fluid reservoir.2. Slowly open the cock on the reservoir of the device and fill the brake-clutch systems with the specified fluid.

	Type	Component	Name	Qty.
-	Fluid	HYDRAULIC BRAKING SYSTEM	Alfa Romeo BRAKE FLUID SUPER DOT4	-

Wait until all the air contained in the hydraulic brake-clutch systems has come out.Close the bleed valves and fit the protective caps.Remove the fluid collection devices.Remove the equipment.Refit the coolant reservoir and secure it with its bolt. Refer to op.. 7040D14  engine bay rear side cover (one) lh or rh - r r (left).  Refer to op.. 7040D12  engine front side cover (one) lh or rh - r r (left). Remove the car from the ramps.Check the efficiency of clutch release, gear engagement and the braking system.