3314679 - 4410D10 front suspension frame - r+r

Removing ( Refitting ) Position the vehicle on the ramp. - 7040D12  engine front side cover (one) lh or rh - r r (right and left).  - 7040D30  engine bay front beam cover - r r .  - 7040D14  engine bay rear side cover (one) lh or rh - r r (right and left).  - 4450B12  front or rear wheels (two) - r+r .  - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. (right and left). Fix the engine cooling radiator at the top to the bodyshell. - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r - 7055A41  RIGHT FRONT GRILLE - R.R. .  - 7055A43  central front grille - r r .  - 7055B10  Front BUMPER - R.R. .  - 7055B54  under-engine guard - r r . Refitting ( Removing ) Fit the screws for the bolts fixing the lower track control arms, complete with spacers, on the front suspension frame.Replace the front suspension frame, with the hydraulic jack, in its housing.1. Fit the brackets (1a), complete with spacers (1b) and tighten the bolts (1c) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1c	Rear bolts	FRONT SUSPENSION SUBFRAME	M12	(Bodyshell side) 12.4 - 13.7

1. Tighten the bolts securing the front suspension frame to the bodyshell to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Front bolts	FRONT SUSPENSION SUBFRAME	M12	(Bodyshell side) 10.5 -11.6

Lower the hydraulic jack and replace the tool used for removing-refitting the front suspension frame.

	Name	Country
-	Support	1.860.975.001

Remove the safety tools used for supporting the power unit.

	Name	Country
-	Support mountings	1.870.650.000

	Name	Country
-	Crossmember	1.820.581.000

	Name	Country
-	Mount	1.820.226.000

 - 1008C10  power unit upper reaction link r r . Tighten the bolt fixing the pipe between the air conditioning system compressor and the condenser.1. Tighten the bolts fixing the gearbox side support flexible mounting to the front suspension frame to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	GEARBOX SIDE RUBBER MOUNT	M8	(Front suspension frame side) 2.4 - 2.9

1. Tighten the bolts fixing the rear power unit flexible mounting to the front suspension frame to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	INTERM RUBBER MOUNT	M10	(Front suspension frame side) 4.9 - 6.1

1. Tighten the bolts fixing the front power unit flexible mounting to the front suspension frame.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	FRONT RUBBER MOUNTS	M10	(Suspension support frame side) 4.9 - 6.1

1. Tighten the bolts fixing the front anti-roll bar to the front suspension frame to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	FRONT ANTI-ROLL BAR	M8	Front suspension frame side 2.7 - 2.9

Tighten the bolts and nuts fixing the radiator lower crossmember to the front suspension frame.1. Tighten the bolts centring the lower track control arms on the front suspension frame.2. Tighten the bolts fixing the lower track control arms to the front suspension frame.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	FRONT SUSPENSION LOWER LEVER	M10	Front suspension. frame side 3.8 - 4.2

3. Tighten the bolts fixing the front shock absorber forks to the lower track control arms.

	Fastening	Component	Ø	Value(daNm)
3	Bolt	FRONT DAMPER FORK ON WISHBONE	M12	Lower track control arm side 8.6 - 9.5

1. Tighten the bolts fixing the power assisted steering box to the front suspension frame to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Nut	POWER STEERING BOX	M12	Front suspension frame side 10.5 - 11.5