3314739 - 5010D12 outside air temperature sensor on door mirror - r+r following electrical circuit check
Removing
(
Refitting
)
- 7005R35 door mirror reflector
- r r
.
- 7005E12 corner cover of one front side door, lh or rh r r
.
1. Undo the bolts (1a) fixing the starter motor support and the
bolts (1b) fixing the cover to the support.2. Remove the outside air temperature sensor.3. Extract and open the connection holder.4. Disconnect the electrical connection for the outside air temperature
sensor and remove it. | Name | Connector |
|---|---|---|
| 4 | Data not available yet | - |
Refitting
(
Removing
)
Connect the electrical connection
for the outside air temperature sensor.Close the connection holder.Check the operation of the outside air
temperature sensor.Place the connection holder back in its
housing.Place the outside air temperature sensor
back in its housing.Tighten the bolts fixing the cover to the
support.Tighten the bolts fixing the starter motor
support. - 7005E12 corner cover of one front side door, lh or rh r r
.
- 7005R35 door mirror reflector - r r
.