3315047 - 7010A14 rear side door - adjust centering and moulding - includes adaptation of hinges and seals on door compartment
Removing
(
Refitting
)
Look to ensure the gap between
door and rear wing and between front and rear door is even. - 7010B14 rear side door catch striker r r1. Loosen the retaining nuts.2. Adjust door position so that it is perfectly aligned with the
body. | Possible adjustment movements are indicated by arrows. |
 | It is advisable to work on one hinge at a time.Fit shims between hinges and door if necessary to ensure the door is adjusted properly |
Refitting
(
Removing
)
After adjustment, tighten the
bolts securing the hinge halves. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Nut | REAR SIDE DOOR HINGES | M8 | 3.6 |