3315258 - 7045J34 front seat squab rake motor, l/h or r/h - r+r following electrical wiring check

Removing ( Refitting ) - 7045A98 front seat rear pouch panel, lh or rh - r r - 7045A10 l/h or r/h front seat (one) - r+r Refitting ( Removing ) Check the condition of the motor, supply with power temporarily and check it is working properly.1. Fit the motor complete with wiring. Ensure holes (1a) are aligned with holes (1b) and ensure pin (2a) on the motor coil is correctly positioned in frame seat (2b). Tighten the bolts retaining the squab rake motor bracket.Connect the electrical supply connector.Prepare an electrical supply system and ensure the motor is working properly.Fit the lower and side part of the squab padding.Fit the seat side trim flap.Position the trim and secure by securing the fasteners with the appropriate tool

	Name	Country
-	Pliers for metal points	1.878.017.001