3314008 - 0010T65 hydraulic brake system bleed air (Automatic transmission)

Position the vehicle on the ramp Proceed with removal  Refer to op.. 7040D12  engine front side cover (one) lh or rh - r r (Left side). Proceed with removal  Refer to op.. 7040D14  engine bay rear side cover (one) lh or rh - r r (Left side). 1. Connect the tool to the brake-clutch fluid reservoir.

NameCountry
1Brake/clutch bleeding equipment1.806.097.001
2. Remove the protective cap on the brake caliper bleed valve. 3. Connect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. 4. Open the bleed valve on the brake caliper.5. Slowly open the fluid reservoir tap.Wait until all the air contained in the hydraulic system has emerged. Close the bleed valve on the brake caliper and fit the protective cap. Repeat the above operations for the other brake calipers.
Remove the collection system (pipe and reservoir).Remove the equipment.

NameCountry
-Brake/clutch bleeding equipment1.806.097.001
Proceed with the refitting  Refer to op.. 7040D14  engine bay rear side cover (one) lh or rh - r r (Left side). Proceed with the refitting  Refer to op.. 7040D12  engine front side cover (one) lh or rh - r r (Left side). Remove the car from the ramps.