3314107 - 1048A14 air cleaner filtering element - replace. (Automatic transmission)

Removing ( Refitting ) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal  - 7040D12  engine front side cover (one) lh or rh - r r (Left side). Proceed with removal  - 7040D30  engine bay front beam cover - r r . 1. Loosen the band and disconnect the air supply duct from heat exchanger to inlet manifold.2. Loosen the band and disconnect the hose from air flow meter to turbocharger, air flow meter side.3. Disconnect the electrical connection from the air flow meter.

	Name	Connector
3	Air flow meter	K41

4. Undo the bolts (4) and remove the air filter cover (4b) complete with air flow meter (4c). 1. Remove the air filter element. Refitting ( Removing ) .

Before fitting a new filter element, remove any impurities in the filter casing (by suction) that could fall into the clean air section of the circuit.

Place a new filter element for the air filter back in the housing.Place the air filter cover, complete with air flow meter and secure it using the bolts. Connect the electrical connection to the air flow meter.Connect the duct from air flow meter to turbocharger, air flow meter side, and tighten the band.Connect the air supply duct from heat exchanger to inlet manifold and tighten the band. Proceed with refitting  - 7040D30  engine bay front beam cover - r r . Proceed with the refitting  - 7040D12  engine front side cover (one) lh or rh - r r (Left side). Connect the negative (-) battery terminal.