1084A42 ENGINE OIL PRESSURE WARNING LIGHT SWITCH - R + R (AUTOMATIC TRANSMISSION) - Alfa - 166 - eLearn

3314177 - 1084A42 engine oil pressure warning light switch - r + r (Automatic transmission)

) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 7055B54 under-engine guard - r r . 1. Disconnect the electrical connection from the engine oil pressure warning light switch.

	Name	Connector
1	Insufficient engine oil pressure (switch) sensor	K30

2. Undo and remove the engine oil pressure warning light switch.

Refitting ( Removing

) Fit the engine oil pressure warning light switch in its seating and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	OIL PRESSURE W/L	M14	2.7 - 3.3

Connect the electrical connection to the engine oil pressure warning light switch. Proceed with refitting - 7055B54 under-engine guard - r r . Connect the negative (-) battery terminal.Remove the car from the ramps.