3314361 - 1060F34 lines to injectors - r r

Removing ( Refitting ) Proceed with removal  - 1016A10  sound-proofing cover - r + r . 1. Undo the connectors (1a), (1b) and remove the pipe from the fuel pump to the fuel injectors (1c).

Use a new pipe from the fuel manifold to the injectors when refitting.

Refitting ( Removing ) 1. Refit a new pipe from the fuel manifold to the injector and secure it using the connectors without tightening them. 2. Tighten the connector for the pipe from the fuel manifold to the injector, injector side, to the recommended torque using a suitable spanner.

	Fastening	Component	Ø	Value(daNm)
2	Connector	FUEL MANIFOLD LINE TO INJECTORS	M12

3. Tighten the connector for the pipe between the fuel manifold and the injector, fuel manifold side to the recommended torque using a suitable spanner.

	Fastening	Component	Ø	Value(daNm)
3	Connector	FUEL MANIFOLD LINE TO INJECTORS	M12

Clean the threaded seats for the above-mentioned pipe on the manifold and the injectors using heptane.

Proceed with refitting  - 1016A10  sound-proofing cover - r + r .