1060G10 FLOW METER - R R - Alfa - 166 - eLearn

3314366 - 1060G10 flow meter - r r

) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 7040D12 engine front side cover (one) lh or rh - r r (Left side). Proceed with removal - 7040D30 engine bay front beam cover - r r . 1. Loosen the band and disconnect the turbocharger air inlet pipe, air flow meter side.2. Disconnect the electrical connection from the air flow meter.

	Name	Connector
2	Air flow meter	K41

3. Undo the nuts (3a) and remove the air flow meter mounting brackets (3b).4. Remove the air flow meter.

Refitting ( Removing

) Refit the air flow meter in its seating.Fit the brackets securing the air flow meter in their seatings and secure them with their nuts.Connect the electrical connection to the air flow meter.Connect the air intake pipe to the turbocharger, air flow meter side, and tighten the band. Proceed with refitting - 7040D30 engine bay front beam cover - r r . Proceed with the refitting - 7040D12 engine front side cover (one) lh or rh - r r (Left side). Connect the negative (-) battery terminal.