5520A12 IGNITION SWITCH ASSEMBLY - R R FOR VERSIONS WITH AIR BAG - Alfa - 166 - eLearn

3314848 - 5520A12 ignition switch assembly - r r for versions with air bag

) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

- 5580C18 air bag module - r+r .

Closely observe the safety regulations established for this operation.

- 7040A26 steering column trim - r+r . - 4110A11 steering wheel - r+r for replacement or check for versions with air bag . - 5550A12 complete stalk unit - r+r for versions with air bag . 1. Release the aerial for the electronic key from the ignition switch.2. Release the electrical wiring from the fixing band and disconnect the electrical connection for the ignition switch.

	Name	Connector
2	Ignition switch	H1

1. Undo the fixing bolt (1a) using a suitable punch and remove the complete ignition switch (1b).

Refitting ( Removing

) Fit the complete ignition switch and fix it using the bolt.Connect the electrical connection for the ignition switch and fix the electrical wiring with the band.Place the aerial for the electronic key back in the ignition switch. - 5550A12 complete stalk unit - r+r for versions with air bag . - 4110A11 steering wheel - r+r for replacement or check for versions with air bag . - 7040A26 steering column trim - r+r . - 5580C18 air bag module - r+r . Connect the negative (-) battery terminal.