3314888 - 5540C18 headlamp/light cluster alignment correction motor switch - r+r

Removing ( Refitting ) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

	Name	Connector
-	Battery	A1B

Open the fuse carrier compartment flap.1. Using the tool (1a) and pushing the fuse carrier compartment, remove the surround (1b) complete with switches.

	Name	Country
1a	Scraper blade	1.823.014.000

2. Disconnect the elelectrical connections (2a), (2b) and (2c) and remove the surround complete with switches.

	Name	Connector
2a	Data not available yet	H10

	Name	Connector
2b	Data not available yet	H10

	Name	Connector
2c	Data not available yet	H10

1. Remove the light cluster alignment motor switch, releasing the fixing tabs. Refitting ( Removing ) Fit the light cluster alignment motor switch in the housing in the surround.Connect the electrical connections.Fit the surround, complete with switches, in the housing.Close the fuse carrier compartment flap.Connect the negative (-) battery terminal.