3315288 - 7055A80 rear ornament - r r

Removing ( Refitting ) 1. Open the boot lid and remove the trim retaining studs. 1. Lower the interior trim and disconnect the link from the lock barrel. 1. Turn crest (1a) and prise out both plugs (1b) protecting the retaining bolts.2. Use a drift to unscrew both self-tapping screws (2a) securing crest (2b) and remove. Refitting ( Removing ) Ensure the lock barrel and crest are undamaged.Fit the retaining clip into its seat.Fit the lock barrel into its seat until the groove engages with the retaining clips.Fit the lock barrel assembly and secure using two new self-tapping screws.Connect the catch link.Test the lock barrel to ensure it works properly.Refit the inner trim and secure by means of studs.