1008A42 GEAR BOX LEFT RIGID MOUNT - R R - Alfa - 166 - eLearn

3314034 - 1008A42 gear box left rigid mount - r r

) Place the car on the ramp.Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 7055B54 under-engine guard - r r . Proceed with removal - 4450B02 left front wheel r r . Proceed with removal - 7055B39 front additional wheel arch half (one), lh or rh, front element - r r (Left side). Position a hydraulic jack under the gearbox1. Undo bolt (1a) and disconnect battery earth lead (1b) from the power unit gearbox end rigid mount.

	Name	Connector
1b	Battery earth	C1

2. Undo the bolts fixing the gearbox side support flexible mounting to the suspension supporting frame.3. Undo the bolts (3a) and remove the power unit gearbox side rigid engine support (3b) complete with flexible mounting (3c).

1. At the bench, undo the nut (1a) and separate the gearbox side rigid power unit support (1b) from the flexible mounting (1c).2. Recover the bracket.

Refitting ( Removing

) 1. Place the bracket back in its housing.2. Fix the flexible mounting (2a) to the gearbox side rigid power unit support (2b) tightening the nut (2c) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2c	Nut	POWER UNIT GEAR BOX END RIGID MOUNT	M10	(Flexible mounting side) 3.8 - 4.7

1. Replace the gearbox side rigid power unit support (1a), complete with flexible mounting (1b), and fix it to the gearbox tightening the bolts (1c) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1c	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10	(Gearbox side) 4.3 - 5.3

2. Tighten the bolts fixing the gearbox side support flexible mounting to the suspension supporting frame to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	GEARBOX SIDE RUBBER MOUNT	M8	(Suspension support frame side) 2.4 - 2.9

3. Connect the battery earth lead (3a) to the gearbox side rigid power unit support and fix it using the bolt (3b).

Remove the hydraulic jack previously positioned under the gearbox. Proceed with the refitting - 7055B39 front additional wheel arch half (one), lh or rh, front element - r r (Left side). Proceed with refitting - 4450B02 left front wheel r r . Proceed with refitting - 7055B54 under-engine guard - r r . Connect the negative (-) battery terminal.Remove the car from the ramps.