1048A50 AIR INLET PIPE TO TURBO CHARGER - R + R - Alfa - 166 - eLearn

3314245 - 1048A50 air inlet pipe to turbo charger - r + r

) Proceed with removal - 7040D12 engine front side cover (one) lh or rh - r r (Left side). Proceed with removal - 7040D30 engine bay front beam cover - r r . 1. Loosen the band and disconnect the air supply duct from heat exchanger to inlet manifold, heat exchanger side. 2. Loosen the band and disconnect the oil vapour recovery pipe, duct side, from air flow meter to turbocharger.

1. Loosen the bands and remove the air supply duct to the turbocharger (1a) complete with resonator. (1b).

1. At the bench, loosen the band and separate the air supply duct to the turbocharger (1a) from the resonator (1b).

Refitting ( Removing

) Connect the resonator to the air supply duct to the turbocharger and tighten the band.Refit in its seating the duct from air flow meter to turbocharger complete with resonator and tighten the bands.Connect the oil vapour recovery pipe, duct side, from air flow meter to turbocharger and tighten the band.Connect the air supply duct from heat exchanger to inlet manifold, heat exchanger side, and tighten the band. Proceed with refitting - 7040D30 engine bay front beam cover - r r . Proceed with the refitting - 7040D12 engine front side cover (one) lh or rh - r r (Left side).