3313990 - 0010K80 80,000km service coupon - emission control versions
Position the vehicle
on the ramp.Check that the tyre treads are not unevenly
worn. | Some types of tyres are fitted
with wear indicators; they have to be replaced as soon as these indicators
become visible. |
| Do not cross-interchange the tyres. |
Check that the tyre pressures are correct,
including the spare tyre. | The tyre pressures should be checked
on cold tyres. |
Earth the front brake pad wear indicator
cable.Turn the ignition on (MAR).Press the brake pedal and check that the
front brake pad wear warning light comes on. Visually check the state of wear of the
rear brake pads.Raise the vehicle and check that the rubber
gaiters on the drive shafts and power steering and the balljoint caps
are not friction damaged or broken.Check that there are no leaks from the
brake and fuel pipes/connectors. Visually check
- bodywork exterior
- underside protection (exhaust, fuel and brake pipes)
- rubber components (dust excluders, hoses, bushes, etc.).
Carry out Op.
3380A04 handbrake - check travel
.
Carry out Op.
1048A14 air cleaner filtering element - replace.
.
Check and if necessary top up the
following fluid levels:
- brake and clutch,
- power steering,
- windscreen wiper,
- battery,
- engine coolant
- etc.
Connect the EXAMINER or other
diagnostic instruments to the diagnostic socket (select the control
unit in question). Check the plausibility of all the parameters
and if necessary carry out the available active diagnoses.
Carry out Op.
0010T12 engine oil and filter replace
.
Carry out Op.
5010B09 purifying filter (antipollen) filter element - replace
.
Position the vehicle on the rampCheck that the tyre treads are not unevenly
worn. | Some types of tyres are fitted
with wear indicators; they have to be replaced as soon as these indicators
become visible. |
| Do not cross-interchange the tyres. |
Check that the tyre pressures are correct,
including the spare tyre. | The tyre pressures should be checked
on cold tyres. |
Check operation of front disc brake pad
wear indicator.Check the condition and wear of the rear
brake pads. Check the condition of the boots on the
driveshaft, power assisted steering box, joint covers and check
the braking system and fuel pipes for leaks.Visually check:
- bodywork exterior
- underbody protection
- flexible and rigid sections of the pipes (exhaust - fuel system
- brakes)
- rubber components (dust excluders, hoses, bushes, etc.).
Check the adjustment of the handbrake lever
travel
Refer to op.. 3380A04 handbrake - check travel
.
Check the fumes
Refer to
op.. 1080A20 smokiness
at exhaust - check with opacimeter
.
Change the fuel filter
Refer to
op.. 1044B20 fuel
filter filtering element - replace
.
Replace the air filter cartridge
Refer to
op.. 1048A14 air
cleaner filtering element - replace.
.
Check and if necessary top up the brake-clutch
fluid level
Refer to op.. 0010T64 brake and or clutch fluid check level and top up
as necessary
.
Check and, if necessary, top up the power
assisted steering fluid level
Refer to
op.. 0010T71 power steering
fluid check level and top up if necessary
.
Check and if necessary top up the windscreen
washer fluid level. Check and if necessary top up the battery
fluid level.
Check and if necessary top up the coolant
level
Refer to op.. 0010T20 coolant change
.
Connect the Examiner or other diagnostic
instruments to the diagnostic socket (select the relevant control unit). Check the plausibility of all the parameters
and if necessary carry out the available active diagnoses.
Check the manual gearbox and differential
oil level
Refer to op.. 0010T41 MANUAL GEARBOX OIL - Check level and top up, if necessary
.
For the Sportronic version only, check
the level of the electronic automatic transmission fluid.
Replace the engine oil and filter
Refer to
op.. 0010T12 engine
oil and filter replace
.
Change the active charcoal combination
particle filter
Refer to op.. 5010B09 purifying filter (antipollen) filter
element - replace
.