3314009 - 0010T67 hydraulic clutch system bleed air (Automatic transmission)

Proceed with removal  Refer to op.. 1016A10  sound-proofing cover - r + r . Proceed with the removal  Refer to op.. 7040D12  engine front side cover (one) lh or rh - r r (Right and left sides). Proceed with removal.  Refer to op.. 7040D30  engine bay front beam cover - r r Proceed with removal  Refer to op.. 7040D14  engine bay rear side cover (one) lh or rh - r r (Left side). Proceed with removal  Refer to op.. 1048B22  air delivery sleeve from heat exchanger to intake manifold - r + r . 1. Connect the tool to the brake-clutch fluid reservoir.

NameCountry
1Brake/clutch bleeding equipment1.806.097.001
2. Remove protective cap (2a) and connect recovery device (2b) to the bleed valve on the hydraulic clutch control actuator. 3. Lift the retaining clip (3a) and withdraw the bleed device (3b) as much as necessary.4. Slowly open the fluid reservoir cock.Wait until all the air contained in the hydraulic clutch disengagement system has come out. Refit the bleed device in its seating, secure it with the retaining clip and refit the protective cap.
Remove the collection system.Remove the bleed equipment.

NameCountry
-Brake/clutch bleeding equipment1.806.097.001
Check correct clutch disengagement and gear engagement.Check the fluid level in the brake - clutch reservoir is correct. .Proceed with refitting  Refer to op.. 1048B22  air delivery sleeve from heat exchanger to intake manifold - r + r . Proceed with the refitting  Refer to op.. 7040D14  engine bay rear side cover (one) lh or rh - r r (Left side). Proceed with refitting.  Refer to op.. 7040D30  engine bay front beam cover - r r Proceed with the refitting  Refer to op.. 7040D12  engine front side cover (one) lh or rh - r r (Right and left sides). .Proceed with refitting  Refer to op.. 1016A10  sound-proofing cover - r + r .