1020D18 FRONT CRANK SHAFT COVER OIL SEAL - REPLACE - Alfa - 166 - eLearn

3314058 - 1020D18 front crank shaft cover oil seal - replace

) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with the removal - 7040D12 engine front side cover (one) lh or rh - r r (Left and right sides). Proceed with removal - 7040D30 engine bay front beam cover - r r . Proceed with the removal - 7040D14 engine bay rear side cover (one) lh or rh - r r (Left and right sides). Proceed with removal - 4450B04 right front wheel r r . Proceed with the removal - 7055B39 front additional wheel arch half (one), lh or rh, front element - r r (Right side). Proceed with removal - 1092G10 single engine belt r r . Proceed with removal - 7055B54 under-engine guard - r r . Proceed with removal - 1092A10 Crankshaft services PULLEY - R.R. . Proceed with removal - 1092G20 engine component single belt fixed tensioner - one - r + r . Proceed with removal - 1008C10 power unit upper reaction link r r . Proceed with removal - 1008C16 body link bracket - r r . Proceed with removal - 1032B10 toothed timing belt - r + r for timing adjustment or replacement . Proceed with removal - 1032B44 toothed drive pulley - r + r with timing belt removed . Release the oil seal from the crankshaft front cover and remove it.

Refitting ( Removing

) 1. Fit a new oil seal (1a) on the front cover using the tool (1b).

	Name	Country
1b	Fitting tool	1.821.247.000

Proceed with refitting - 1032B44 toothed drive pulley - r + r with timing belt removed . Proceed with refitting - 1032B10 toothed timing belt - r + r for timing adjustment or replacement . Proceed with refitting - 1008C16 body link bracket - r r . Proceed with refitting - 1008C10 power unit upper reaction link r r . Proceed with refitting - 1092G20 engine component single belt fixed tensioner - one - r + r . Proceed with refitting - 1092A10 Crankshaft services PULLEY - R.R. . Proceed with refitting - 1092G10 single engine belt r r . Proceed with the refitting - 7055B39 front additional wheel arch half (one), lh or rh, front element - r r (Right side). Proceed with refitting - 4450B04 right front wheel r r . Proceed with refitting - 7055B54 under-engine guard - r r . Proceed with the refitting - 7040D14 engine bay rear side cover (one) lh or rh - r r (Left and right side). Proceed with refitting - 7040D30 engine bay front beam cover - r r . Proceed with the refitting - 7040D12 engine front side cover (one) lh or rh - r r (Left and right side). Connect the negative (-) battery terminal.Remove the car from the ramps.