3314355 - 1060E40 supplementary pressure pump - r r

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with the removal  - 7040D12  engine front side cover (one) lh or rh - r r (Right side). Proceed with the removal  - 7040D14  engine bay rear side cover (one) lh or rh - r r (Right side). Proceed with removal - 4450B04 right front wheel r r . Proceed with removal  - 7055B54  under-engine guard - r r . Proceed with the removal  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (Right side). Proceed with removal  - 1092G10  single engine belt r r . Proceed with removal  - 1092A10  Crankshaft services PULLEY - R.R. . Proceed with removal  - 1092G21  engine component single belt fixed tensioner - r rwith belt removed . Proceed with removal  - 1016A10  sound-proofing cover - r + r . Proceed with removal  - 1008C10  power unit upper reaction link r r . Proceed with removal  - 1032D12  timing system protective cover(s) - r + r . Proceed with removal  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement . Proceed with removal  - 1060E30  pressure pump pulley - r r . Proceed with removal  - 1060E10  pressure pump - r r . 1. Disconnect the vacuum pipes from the brake servo vacuum pipe, pneumatic valve on the throttle body and rigid section connected to the variable geometry solenoid. 2. Disconnect the electrical connection from the solenoid on the vacuum reservoir.

	Name	Connector
2	Butterfly casing solenoid valve	L62

Release the vacuum pipes from the fastening bands.3. Undo the nuts (3a) and remove the vacuum reservoir (3b) from the mounting bracket. 1. Undo the bolts securing the rigid coolant return pipe to the coolant supply reservoir. Proceed with removal  - 1084A16  oil dip stick pipe - r r . 1. Undo the bolts (1a) and remove the power steering pump drive pulley (1b). 1. Undo the bolts fixing the power assisted steering pump and move it back as far as necessary. 1. Undo the bolts (1a) and remove the power steering pump guard (1b). 1. Undo the bolts and remove the bracket. 1. Undo the bolts (1a) and remove the pressure pump mounting (1b). Refitting ( Removing ) 1. Place the pressure pump mounting (1a) back in its housing and fix it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	INJECTION PRESSURE PUMP MOUNT	M8	(Engine crankcase side) 2.3 ÷ 2.8

Place the bracket back in its housing and secure it using the bolts. Place the power assisted steering pump pulley guard back in its housing and secure it using the bolts.1. Place the power assisted steering pump back in its housing and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	POWER STEERING PUMP	M8	(Support side) 2.3 ÷ 2.8

1. Place the power assisted steering pump pulley (1a) back in its housing and fix it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	POWER STEERING PUMP DRIVE PULLEY	M8	(Power assisted steering pump side) 2.3 ÷ 2.8

Proceed with refitting  - 1084A16  oil dip stick pipe - r r . Undo the bolts securing the rigid coolant return pipe to the coolant supply reservoir. Refit the vacuum reservoir back in its seating and secure it to the mounting bracket with the relevant nuts. Secure the vacuum pipes with the retaining bands.Connect the electrical connection to the solenoid on the vacuum reservoir.Connect the vacuum pipes to the brake servo vacuum pipe, to the pneumatic valve on the throttle body and rigid section connected to the variable geometry solenoid. Proceed with refitting  - 1060E10  pressure pump - r r . Proceed with refitting  - 1060E30  pressure pump pulley - r r . Proceed with refitting  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement . Proceed with refitting  - 1032D12  timing system protective cover(s) - r + r . Proceed with refitting  - 1008C10  power unit upper reaction link r r . Proceed with refitting  - 1016A10  sound-proofing cover - r + r . Proceed with refitting  - 1092G21  engine component single belt fixed tensioner - r rwith belt removed . Proceed with refitting  - 1092A10  Crankshaft services PULLEY - R.R. . Proceed with refitting  - 1092G10  single engine belt r r . Proceed with the refitting  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (Right side). Proceed with refitting  - 7055B54  under-engine guard - r r . Proceed with refitting - 4450B04 right front wheel r r . Proceed with the refitting  - 7040D14  engine bay rear side cover (one) lh or rh - r r (Right side). Proceed with the refitting  - 7040D12  engine front side cover (one) lh or rh - r r (Right side). Connect the negative (-) battery terminal.Remove the car from the ramps.