5505A18 MULTI-FUNCTION CONTROL UNIT - R R - Alfa - 166 - eLearn

3314824 - 5505A18 multi-function control unit - r r

) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

1. Unscrew bolt (1a) and open fuse access cover (1b).2. Undo the bolt (2a) and remove the integrated multiservices unit (2b) after having disconnected the electrical connections (2c), (2d), (2e), (2f) and (2g).

Refitting ( Removing

) Connect the electrical connections to the integrated multiservices unit, then refit it in its seating and secure with its bolt.Close the fuse access cover and secure using the appropriate bolt.Connect the negative (-) battery terminal

Removing ( Refitting

) - 7040B22 luggage compartment/load platform moulding - r+r - 7025B66 boot compartment seal - r+r - 7040B20 back trim for luggage compartment/load platform - arrange - 7025B41 boot lid lock - 7040B10 load platform (luggage platform) trim - r+r - 7040B13 load compartment/load platform right side trim - r r1. Undo the nuts.2. Disconnect the electrical connections (2a, 2b, 2c) for the control unit.

	Name	Connector
2a	A.B.I control unit	M40A

	Name	Connector
2b	A.B.I control unit	M40B

	Name	Connector
2c	A.B.I control unit	M40C

3. Recover the control unit.

Refitting ( Removing

) Check that the multiservices control unit is not damaged.Connect the electrical connections and place the control unit in position.Retighten the nuts. - 7040B13 load compartment/load platform right side trim - r r - 7040B10 load platform (luggage platform) trim - r+r - 7025B41 boot lid lock - 7040B20 back trim for luggage compartment/load platform - arrange - 7025B66 boot compartment seal - r+r - 7040B22 luggage compartment/load platform moulding - r+r