3315108 - 7025A10 bonnet lid - square

The full intervention including lid realignment is necessary only when car hinges have been removed.

Removing ( Refitting )  - 7025A34  bonnet lid lock (one) - r+r or repair - 7025A66  l/h or r/h bonnet lid support damper (one) - r+rHand-tighten the fasteners retaining the hinges to the bonnet and car and then lower the bonnet lid.Check the gap is even and the lid is level with the wings.1. With the aid of a second operator, open the bonnet lid to adjust the gap and level the bonnet lid in relation to the wings. Permitted adjustment movements are indicated by arrows.Close the bonnet and check it is properly aligned.2. Carry out further adjustments if the position is found to be incorrect and then tighten the fastenings to torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	BONNET LID HINGES	M8	2.4

Refitting ( Removing )  - 7025A34  bonnet lid lock (one) - r+r or repair1. Adjust buffer blocks if necessary.2. Adjust catch positon if necessary. Refer to op.   7025A34  bonnet lid lock (one) - r+r or repair . If the adjustments described above are insufficient, adjust bonnet lid hinge position as described below.3. Loosen bolts (3a) securing hinges (3b) and adjust position until the bonnet lid is aligned. Arrows (3c) indicate possible movements.4. Tighten bolts (3a) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
3a	Bolt	BONNET LID HINGES	M8	2.4

 - 7025A66  l/h or r/h bonnet lid support damper (one) - r+rTouch up the paintwork in the hinge area if necessary. The full intervention including lid realignment is necessary only when car hinges have been removed.  Refer to op.. 7025A34  bonnet lid lock (one) - r+r or repair Refer to op.. 7025A66  l/h or r/h bonnet lid support damper (one) - r+rHand-tighten the fasteners retaining the hinges to the bonnet and car and then lower the bonnet lid.Check the gap is even and the lid is level with the wings.1. With the aid of a second operator, open the bonnet lid to adjust the gap and level the bonnet lid in relation to the wings. Permitted adjustment movements are indicated by arrows. Close the bonnet and check it is properly aligned.2. Carry out further adjustments if the position is found to be incorrect and then tighten the fastenings to torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	BONNET LID HINGES	M6	0.8

Refit the lock.  Refer to op.. 7025A34  bonnet lid lock (one) - r+r or repair1. Adjust buffer blocks if necessary.2. If necessary adjust the catch position.  Refer to op.. 7025A34  bonnet lid lock (one) - r+r or repair If necessary, adjust the position of the bonnet catch hook.  Refer to op.. 7025A57  bonnet catch hook - r rIf the adjustments described above are insufficient, adjust bonnet lid hinge position as described below. 3. Loosen bolts (3a) securing hinges (3b) and adjust position until the bonnet lid is aligned. Arrows (3c) indicate possible movements. Tighten bolts (3a) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
3a	Bolt	BONNET LID HINGES	M6	0.8

 Refer to op.. 7025A66  l/h or r/h bonnet lid support damper (one) - r+rTouch up the paintwork in the hinge area if necessary.