The control unit
H11, controls H6 and
the controls for the automatic transmission H37 receive an ignition-controlled
supply (15/54) via the line for fuse F5 of junction unit B2.
Light intensity is controlled by a wheel
H11
located near the exterior lighting switch.
Depending on the instrument panel
E50
setting, the control unit H6 is supplied, via pin 16 of control
H11, at pin 17 of connector A, control unit H6 at pin 2 of connector
B and the climate control system controls H80 at pin 9.
The device
H80
, in turn, supplies
switch unit
H35
and the ICS display
E60
.
Pin 3 of connector B of
H6 provides the
reference earth for the instrument panel E50 at pin 18 of connector
A and for control H11 at pin 7.
Control
H6 is supplied at pin 6 of connector
A for the line for Check device M45 which provides the side lights
on signal from pin 6 of connector D.
An ignition-operated power supply (15/54)
for the Check device
M45 arrives via relay T1 and fuse F9 of
junction unit B2.