3314774 - 5040A58 pipe from expansion valve to compressor - r+r

Follow the safety instructions (  See assembly 5040A   air conditioner coolant circuit ).
Removing ( Refitting ) Proceed with the removal  - 7040D12  engine front side cover (one) lh or rh - r r (Left and right sides). Proceed with removal  - 7040D30  engine bay front beam cover - r r . Proceed with the removal  - 7040D14  engine bay rear side cover (one) lh or rh - r r (Right side). Proceed with removal  - 1016A10  sound-proofing cover - r + r . Drain the air conditioner coolant circuit - 5540A10 l/h or r/h front side light (one) - r+r . Proceed with removal  - 7055A18  Windscreen base TRIM - R.R. . 1. Undo the nut (1a) and disconnect the pipe from the expansion valve to the compressor (1b), expansion valve side.
Seal the disconnected connectors, using suitable plugs, to prevent humidity and impurities from entering the system.
1. Undo the bolt (1a) and disconnect the pipe from the expansion valve to the compressor (1b), compressor side.
Seal the disconnected connectors, using suitable plugs, to prevent humidity and impurities from entering the system.
1. Remove the pipe from the expansion valve to the compressor releasing it from the fastenings.
Refitting ( Removing ) Place the pipe from the expansion valve to the compressor back in its housing and secure it using the fastenings.1. Connect the pipe from the expansion valve to the compressor (1a), compressor side and tighten the bolt (1b) to the recommended torque.
Replace the O-Ring seals for the connectors. Only use green coloured seals, resistant to R134A refrigerant. Lubricate the thread of the connectors using anti-freeze.

FasteningComponentØValue(daNm)
1b----
1. Connect the pipe from the expansion valve to the compressor (1b), expansion valve side and tighten the nut (1b) to the recommended torque.
Replace the O-Ring seals for the connectors. Only use green coloured seals, resistant to R134A refrigerant. Lubricate the thread of the connectors using anti-freeze.

FasteningComponentØValue(daNm)
1bBoltEXPANSION VALVE - COMPRESSOR PIPEM6(Expansion valve side) 0.7 ÷ 1.1
Fill the air conditioner coolant system  - 5040A10  Air conditioning refrigerant CIRCUIT - Draining and Refilling . Proceed with refitting  - 7055A18  Windscreen base TRIM - R.R. . Proceed with refitting  - 1016A10  sound-proofing cover - r + r . Proceed with the refitting  - 7040D14  engine bay rear side cover (one) lh or rh - r r (Right side). Proceed with refitting  - 7040D30  engine bay front beam cover - r r . Proceed with the refitting  - 7040D12  engine front side cover (one) lh or rh - r r (Left and right side).